What Makes the Craftsman C3 19.2-Volt XCP Battery Pack Stand Out
The Craftsman C3 19.2-Volt XCP High Capacity Lithium-Ion Battery Pack delivers extended runtime, rapid charging, and compatibility with 100+ Craftsman C3 tools. Its lithium-ion technology ensures lightweight durability, consistent power output, and resistance to memory effect. With a 2.4Ah capacity, it outperforms older NiCd models, making it ideal for heavy-duty tasks. A 3-year warranty underscores its reliability.
What Tools Are Compatible With the C3 XCP Battery?
This battery powers all Craftsman C3 19.2V tools, including drills, circular saws, impact wrenches, and reciprocating saws. It’s backward-compatible with pre-2010 C3 tools via adapter kits. However, ultra-high-drain devices like vacuum cleaners may require the 4.0Ah variant for optimal runtime.
For professionals managing multiple tools, the XCP battery’s cross-compatibility simplifies workflow transitions. Recent tool releases like the C3 Brushless Hammer Drill and 7-1/4″ Circular Saw show 12-15% efficiency gains when paired with this battery. The table below outlines compatibility highlights:
| Tool Category | Recommended Use | Runtime (2.4Ah) |
|---|---|---|
| Drill/Driver | 300+ screws | 45-60 minutes |
| Reciprocating Saw | 150 cuts (2×4 pine) | 25-35 minutes |
| LED Work Light | Continuous use | 8+ hours |
Adapters like the CMXA001 allow use with legacy tools, though runtime decreases 18-22% due to higher energy conversion losses. For optimal performance in cold environments below 50°F, consider pre-warming batteries in insulated cases.
How to Properly Store the Craftsman C3 XCP Battery?
Store at 40–50% charge in dry, 68°F environments. Fully discharging before storage causes irreversible sulfation, reducing capacity by 15% per month. For >6-month storage, recharge to 50% every 90 days. Use silica gel packs in storage cases to maintain <40% humidity.
Proper storage maintenance extends battery lifespan beyond warranty periods. Implement these practices for long-term preservation:
- Clean terminals monthly with isopropyl alcohol to prevent oxidation
- Rotate batteries quarterly if storing multiple units
- Use climate-controlled storage with <5°F daily temperature fluctuation
| Storage Duration | Ideal Charge Level | Maintenance Check |
|---|---|---|
| 1-3 months | 40-60% | Monthly voltage test |
| 3-6 months | 50% | Bi-monthly recharge |
| 6+ months | 30-40% | Quarterly full cycle |
Batteries stored improperly may require recovery charging – a 3-hour trickle charge at 0.5A before normal use. Always inspect for swelling or terminal corrosion before reinstallation.
What Safety Features Does the XCP Battery Include?
The battery integrates:
1. Multi-layer PCB protection against overcharge/over-discharge
2. Thermal cutoff at 158°F (70°C)
3. Cell balancing during charging
4. Short-circuit shutdown
5. Moisture-resistant terminal covers
These features reduce failure risks by 82% compared to unbranded alternatives, per UL certification testing.
OEM Lithium Battery Supplier for All Applications
How Long Does the XCP Battery Take to Charge Fully?
Using the CE030B charger, the 2.4Ah XCP battery charges in 60 minutes (0%–100%). Partial charges take 15–20 minutes for 25% capacity. Avoid using aftermarket chargers, as improper voltage regulation can reduce cell lifespan by up to 30%.
What Warranty Coverage Applies to the XCP Battery?
Craftsman provides a 3-year limited warranty covering defects and premature capacity loss (<70% within 2 years). Warranty voids if:
• Used with non-C3 tools
• Tampered with
• Exposed to liquids
Register the battery online within 30 days of purchase to activate coverage.
24V 200Ah LiFePO4 Forklift Battery
“The XCP’s use of NMC (Nickel Manganese Cobalt) cells strikes a balance between energy density and thermal stability,” says a Redway engineer. “While its 2.4Ah rating seems modest, the 25A continuous discharge rating enables it to handle 750W+ tools. For users needing more runtime, pairing two XCPs with Craftsman’s dual-port charger reduces downtime by 65%.”
FAQs
- Does the XCP Battery Work With Non-Craftsman Tools?
- No—the proprietary terminal design prevents use with other brands without risky modifications. Third-party adapters may void warranties and cause overheating.
- How Many Charge Cycles Can the XCP Battery Handle?
- Rated for 1,200 cycles to 80% capacity when charged at 77°F. High-temperature charging (≥95°F) reduces this to 800 cycles. Deep discharges below 10% accelerate capacity fade by 2×.
- Is the XCP Battery Airport-Safe?
- Yes—its 46.08Wh capacity falls under the 100Wh FAA limit for carry-on batteries. Always transport in protective cases with terminals covered. Provide purchase documentation if questioned by security.